Apollo Addressable VADs

A range of EN54-23 certified, addressable loop powered beacons and sounder beacons for use on Apollo XP95 & Discovery protocol systems.

  • EN54-23 compliant
  • Loop powered
  • High intensity flash
  • Red or white body
  • Wall mounted VADs
  • Ceiling mounted VADs

Product Overview

Category W. Loop Powered VADs

The wall mounted VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. Available with red or white body

  • Loop powered
  • Uses high intensity LED (white flash only)
  • EN 54-23 Compliant Category W. VAD
  • Coverage W-2.5-7
  • Automatic LED check when VAD activated
  • Flash rate 0.5Hz
  • Fault signal if LED check failed
  • Synchronised with the Apollo Protocol

Category C. Loop Powered VADs

The ceiling mounted VAD has been developed as a primary or supplementary alarm device for use in situations where there is a risk that sounders will not be heard. Available with red or white body

  • Loop powered
  • Uses high intensity LED (white flash only)
  • EN 54-23 Compliant Category C. VAD
  • Coverage C-3-8.5
  • Automatic LED check when VAD activated
  • Flash rate 0.5Hz
  • Fault signal if LED check failed
  • Synchronised with the Apollo Protocol

Cat O. XP95 Sounder VAD Base with Isolator

The XP95 Sounder VAD Base is a loop-powered sounder and VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas.

  • EN 54-23 approved
  • Flash rate of 0.5Hz
  • Synchronisation of ‘alert’ and ‘evacuate’ tones
  • Synchronisation of visual indicator flash
  • Individual and group addressing
  • Built in isolator

Cat O. XP95 VAD Base with Isolator

The XP95 VAD Base is a loop-powered VAD combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The VAD base can be used with either a detector fitted or with a cap as a stand alone device.

  • EN 54-23 approved
  • Flash rate of 0.5Hz
  • Synchronisation of VAD flash
  • Individual and group addressing
  • Built in isolator

Cat O. Discovery Sounder VAD Base with Isolator

The Discovery Sounder VAD Base makes full use of the Discovery protocol. For ease of commissioning a ‘Magnetic Wand’ can be used to test and adjust each sounder VAD locally.

  • EN 54-23 approved
  • Flash rate of 0.5Hz
  • It is possible to set individual volume of the sounder from the panel
  • 15 pairs of tones including IMO code 1A ‘General Emergency Alarm’ and IMO Code 2 ‘All Clear’
  • Built in isolator

Downloads

The following downloads are available for this product:

Apollo Category-C Loop Powered Vads data sheet

Apollo Category-W Loop Powered Vads data sheet
Apollo Sounder Vad Base data sheet
Apollo VAD Base data sheet
Discovery Sounder Vad Base data sheet

Your Name (required)

Your Email (required)

Product you are enquiring about

Your Message