Magnetic Door Retainers

A range of wall and floor mounted, 24v and mains powered magnetic door retainers. Approved and tested to EN1155.

  • ABS plastic & pressed steel wall mounted units
  • Floor mounted units
  • Universal heavy duty models
  • Range of accessories
Category: .

Product Overview

Type ’87’ Wall Mounted

The Type 87 door holder is surface mounted, and is housed in a white fire resistant ABS casing. Type tested to meet EN1155, knockouts for surface or back cable entry, and a spring loaded pin to give zero residual holding force when de-energised.

The door holder is fitted with an integral manual release button, allowing the door to be closed without operating the fire alarm.

  • 24v dc or 230v ac supply voltage
  • Zero residual force
  • 200N and 500N holding force available
  • Fire resistant ABS casing
  • Manual release button
  • Approved to EN1155

Type ’59’ Wall Mounted

The Type 59 magnet is built around a robust fascia plate for flush mounting on a standard electrical back box. A spring-loaded pin ensures zero residual holding force. For surface mounting, the door holder is supplied with a matching pressed steel surface mount box with 20mm knockouts.

The 230 Vac unit includes a filter for EMC emissions. Internal diodes dissipate any “back EMF” on switch-off, reducing wear at the control unit.

  • 24v dc or 230v ac supply voltage
  • Zero residual force
  • 200N holding force
  • Robust enclosure
  • Manual release button
  • Approved to EN1155

Type ’84’ Floor Mounted

The floor mounted fire door holder is designed to hold fire doors for ease of access releasing them when an alarm is triggered. They are ideally suited to applications where maximum protection is needed against vandalism or accidental damage.

The floor mounted fire door holder is also suited to applications where the door is not opening near a wall. The holder features a rugged cast aluminium housing, a holding magnet with integral ejection pin and a manual release switch. Cable entry can be through the base or through a 20mm hole provided in the housing for surface mounted conduit or pyro.

  • 200N and 500N holding force available
  • Robust aluminium construction
  • Manual release button
  • Approved to EN1155

Universal Heavy Duty Door Retainers

The universal fire door holder can be used for many different door holding applications and can be floor, wall or ceiling mounted.

The stand and adjustable head are fabricated from steel providing a very robust structure. A moulded cover is included to conceal the mounting fixings once the holder is fitted.

The stand is available in two standard lengths, but can easily be cut down to shorter lengths on site.

  • Floor, wall and ceiling mounting
  • 500N or 1000N holding force available
  • Zero residual force
  • 300mm and 200mm lengths available
  • Approved to EN1155

Downloads

The following downloads are available for this product:

Type 87 data sheet
Type 59 data sheet
Type 84 data sheet
Universal data sheet

Accessories

The following accessories are available for our range of magnetic door retainers:

Description Part No.
Floor mounting bracket DR-FB2
Chain mounting catch plates (PLATES ONLY – NO CHAIN SUPPLIED) DR-CAP
Chain mounting catch plates with protective rubber ‘O’ ring (PLATES ONLY – NO CHAIN SUPPLIED) DR-CAP-O
Chain mounting catch plates (C/W 1 METRE OF CHAIN) DR-CAP-CHAIN
Chain mounting catch plates with protective rubber ‘O’ ring (C/W 1 METRE OF CHAIN) DR-CAP-O-CHAIN
Spare catch plate, low profile, metal style DRC-P
Spare catch plate, adjustable, ABS plastic style DRC-P-1
Spare catch plate for 500N door retainers, low profile metal style DRC-P-2

Your Name (required)

Your Email (required)

Product you are enquiring about

Your Message