Talentum Flame Detectors

The Talentum® range of specialist flame detector products has been developed to protect critical and front line industries from the risk of fire. Talentum Flame Detectors are ideal for applications where fast acting and accurate detection of fire is essential.

  • Available for indoor and outdoor areas
  • Flame-proof, explosion-proof and high ambient temperature options
  • Internal self-test capability giving the highest immunity to false-flame sources
  • Detects invisible flames from fuels such as Hydrogen and other inorganic fuels
  • Immune to the effects of wind, draughts and sunlight

Product Overview

An optical flame detector senses the heat and light produced by a flame, in an instant

Using infra-red (IR) sensing technology flames can be detected through such elements as dust, steam and smoke; they are also immune to the effects of wind or draughts of air. With the addition of an ultra-violet (UV) sensor a flame detector becomes highly immune to false signals such as sunlight. The optical sensors within the detector receive the IR and/or UV radiation emitted by the flames. The processor within the detector analyses the optical sensor signal waveforms and determines if they represent flames and if so accepts them. If the signals do not match the internal algorithms for flames then they are considered to be false sources and rejected.

So rapid is the detection, and so respected is the Talentum® solution, that the BLOODHOUND Project to set a new land speed record of 1000mph has selected Talentum® as its flame detection device.

Watch the Video ⇒

Talentum® Dual IR Flame Detector Range

Standard Models, Hazardous Area Model – Intrinsically Safe (IS), Hazardous Area Models – Flameproof (Exd), Stainless Steel Housing 

These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detector’s operation when remotely instructed.

They can operate on a conventional 2-wire (14-28 Vdc) fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors’ operating modes can be user selected giving a choice of alarm currents, response times, latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55°C.

Key Features

  • High immunity to false sources
  • For applications with visible light present
  • Detects invisible flames from fuels such as Hydrogen and other inorganic fuels
  • Selectable response speed
  • Optical self-test

Talentum® Triple IR Flame Detector Range

Standard Models, Hazardous Area Model – Intrinsically Safe (IS), Hazardous Area Models – Flameproof (Exd), Stainless Steel Housing 

These flame detectors give excellent immunity to false flame sources both indoors or out. They have internal self-test sources that check the detector’s operation when remotely instructed.

They can operate on a conventional 2-wire (14-28 Vdc) fire systems or 4-20mA process control systems. Relay contacts are also available for Fire and Fault signals. The detectors’ operating modes can be user selected giving a choice of alarm currents, response times, latching or non-latching outputs and sensitivity. The detectors have a maximum ambient operating temperature of 55°C.

Key Features

  • Excellent immunity to false sources
  • Suitable for indoor and outdoor areas
  • Detects invisible flames from fuels such as Hydrogen and other inorganic fuels
  • Selectable response speed
  • Optical self-test

Talentum® UV/Dual IR Flame Detector Range

Standard Models, Hazardous Area Models – Flameproof (Exd), Stainless Steel Housing 

These flame detectors give the highest immunity to false flame sources both indoors or out. They have internal self-test sources that check the detector’s operation when remotely instructed. The maximum ambient temperature is normally 55°C or 85°C for the higher temperature specification detectors.

Key Features

  • Highest immunity to false sources
  • Suitable for indoor and outdoor areas
  • Detects invisible flames from fuels such as Hydrogen and other inorganic fuels
  • Selectable response speed
  • Optical self-test

Downloads

The following downloads are available for this product:

Talentum Brochure

Your Name (required)

Your Email (required)

Product you are enquiring about

Your Message