Output Card

The OPCARD-8 has been developed for use with the Haes conventional control panels to provide up to 16 common or zonal outputs. The card consists of 8 x switched -ve outputs and 8 x volt free changeover relays.

 

 

Product Overview

The OPCARD-8 has been developed for use with the Haes conventional control panels to provide up to 16 common or zonal outputs. The card consists of 8 x switched -ve outputs and 8 x volt free changeover relays. A permanent 28v supply is required which can be taken from the 28v output on the main circuit board of the control panel. The card also provides a 28v output which can be utilised if driving additional relays from the switched -ve outputs.

Up to 4 output cards can be linked together to provide up to 32 common or zonal outputs.

The outputs have several configuration options including common or zonal operation. The configuration options are set by a simple DIL switch selection.

Technical Specification

28v-0v Supply Input

Max input current = 5A.

Input voltage = 22vdc – 32vdc

28v Supply Output

Fused @ 500mA

Fuse = 500mA resettable fuse

OP1-OP8 Switched Negative Outputs

Overload voltage protected to 52vdc

Current limited 680R

Max load = 40mA per output

Relay Contacts 1-8 (C-NC-NO)

Unfused clean changeover

Max 3A @ 30vdc

Downloads

The following downloads are available for this product:

OPCARD-8 instruction leaflet

Your Name (required)

Your Email (required)

Product you are enquiring about

Your Message