VDR (Voyage Data Recorder) Comms Card

The Esento Marine VDR (Voyage Data Recorder) output card is a plug in communications card for the Haes Esento Marine range of fire alarm control panels for connection to a ships Voyage Data Recorder.

Product Overview

The VDR card provides activity data from the fire control panels which is in accordance with IEC 61162-1 Ed.3 Maritime navigation and radio communication equipment and systems-Digital Interfaces, NMEA 0183 Standards for interfacing marine electronic devices.

Signal Output Messages

  • System Normal
  • Zonal Fire Status
  • Zonal Faults: open circuit, short circuit, detector removed
  • Sounder Circuit Faults: open circuit, short circuit
  • Disablements: zones, sounders, auxiliaries, delays
  • Test Mode Operation
  • Class Change & Alert Status Input Activations
  • Power Supply Faults: charger, battery, voltage & earth faults
  • Muster Alarm Activities
  • Control Button Activations: resound, silence, reset
  • Repeater Fault
  • System Fault Conditions (processor restarts)
  • Status Restoral Messages for Fires & Faults
  • System Status – repeated every 5 minutes

 

Technical Specification

PCB Dimensions (mm): 60H x 75W

Current Consumption: <6mA

Data Output: RS485, ASCII characters, BAUD rate: 4800, data bits 8 (D7=0), parity 0, stop bits 1

Designed to: IEC 61162-1 Ed.3 Maritime navigation and radio communication equipment and systems-Digital Interfaces, NMEA 0183 Standards for interfacing marine electronic devices

Downloads

The following downloads are available for this product:

VDR Card Sales Leaflet
VDR Card Installation Guide

Your Name (required)

Your Email (required)

Product you are enquiring about

Your Message