The HS-4100S comes fitted complete with an internal loop driver card suitable for Apollo (XP95 & Discovery) and Hochiki (ESP) protocols and 2 on-board sounder circuits.
The control panel consists of a simple to use LCD menu graphical interface, dual, flash-based microprocessor technology driven by an on-board 24v dc, 2 amp high efficiency switched mode power supply and charger approved to EN54 parts 2 & 4.
Powerful cause and effect programming makes the panel suitable for a wide range of site applications. Fully programmable on-site via the on-board alphanumeric keypad, or PC-NeT configuration tools.
An extensive suite of user-friendly Windows based PC software programs have been developed to supplement the HS-4100S control panel.
- Full support of Apollo (XP95& Discovery) & Hochiki (ESP) protocols.
- Advanced graphical LCD user interface
with up to 100 fire zones as standard
allowing full EN54 compliance without
additional hardware expansion.
- Dual flash-based microprocessor
technology with Real-Time Clock onboard.
- Dedicated RS232 Serial Port for direct PC
or modem connection.
- Installer friendly auto-learn and
loop detection facility for ease of
commissioning and fault finding.
- Fully programmable via the on-board
alphanumeric keypad, or PC configuration
- Flash memory and the advanced graphical
display enables the panel to be configured
to operate in virtually any language or
character set, and allows the installer’s
logo and company details to be applied
to the LCD display using the ‘Logo’
- Robust removable equipment chassis with
plug-in connectors for simple fixing and
Dual flash-based processors with real-time
clock, trace’ diagnostics and programmable
Backlit 240 x 64 graphical LCD
3 red (2 x Fire, 1 x Alarm), 1 green (Power) & 12 amber (Fault & System)
Alpha numeric keypad, navigation keys for
reset, mute, silence/resound and evacuate
No of Fire Zones
No of Loops
On Board Sounder Circuits
2 x 1 amp, programmable
On Board Relays
2 x 1 amp, 30v AC/DC programmable
1 x 24v, 500mA
Programmable Switch Inputs
8 x volt free digital inputs
Total Available Output Current
2 amps maximum, available for loop current
+ sounder outputs + auxiliary supply
230v 50Hz ac (+10%, -15% tolerance) 0.4 amp
24v 7 Ah Internal, 24v 12 Ah external
0.4 amp DDP monitored, temperature
compensated integral charger
1 x On-board RS232 connection for PC,
Modem, or external printer
Via on-board keypad or PC running Windows
1000 fire & event + diagnostic
Enclosure / Colour
Steel IP30 / Radon MW334E Interpon
Cable Entry (20mm Knockouts)
7 x top & 7 x rear,
Size, H x W x D mm
Standard Enc: 320 x 345 x 85
The following downloads are available for this product:
HS-4100S Technical Data Sheet